Berker Smart Key

Berker smart key

berker, biq
5 Gang key (10 bridges) – thermostatic
Push-button keys in 2 normal and thermostatic models
1, 4, 6, 8 are normal keys, and 6, 8, and 10 are thermostatic keys
Light control, dimmer, cooling and heating, curtains and …
Light control, dimmer, cooling and heating, curtains and …
In white, glass, white, matte white and steel colors
Made of steel, glass and plastic
The ability to define a scenario (entry and exit, study, guest, TV, rest, etc.)
Equipped with LED indicator

Description

 

Berker TS Sensor

Understatement is an art, and the Berker TS Sensor makes it perfect. Up to eight functions are

concealed under a pure surface that is practically flush with the wall, and can be custom-labelled

on request. A single touch is all it takes to control lights, heating or blinds. In this way, the Berker

TS Sensor can offer an exciting variety of possibilities – and, at the same time, still seems as

calm as possible.

• Suitable for installation bus systems and relay circuits

• Having the electronics directly on the rear side of the glass plate creates enormous switching

safety

• Particularly flat construction method permits flush mounting

• Readiness and switching states can be display using LEDs

• Completely smooth surface thanks to screw-free fastening

• Labelling on rear side meaning perfect protection

Glass sensors comfort

− With integral bus coupling unit

− Operation by gently touching the sensor surfaces on the white LEDs

− For switch, push-button, dimmer and shutter functions

− Single and two push-button operation parameterisable

− Retrieval, setting and storing of 8 light scenes

− One push-button operation for switching, buttons, blinds and dimming

− Extension unit for light scene push-button

− Integrated temperature sensor

− Temperature measurement via internal and/or external temperature sensor with mean value formation

− Additional connection for external temperature sensor

− Usable as thermostat extension unit

− Provision of the internal temperature value via communication object

− Blocking function for sensor surface e.g. for cleaning the glass surface

− Value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

− Bus connection via connecting terminal

− For vertical mounting

− For mounting, always use the flat 2gang wall box, order no. 1871

− With adapter ring for dismantling protection, shadow jointing and special installation conditions

− With disassembly suction tool

− For individually labelled glass and touch sensors (configured variations), the Web Configurator generates a layout

number, which must be additionally specified when placing the order.

− Many options for labelling (text and/or icons) are available via the web configurator at

http://ts-glas-sensor.berker.de

Glass sensors with thermostat

− With integral bus coupling unit

− Operation by gently touching the sensor surfaces on the white LEDs

− For switch, push-button, dimmer, blind and thermostat functions

− Single and two push-button operation parameterisable

− Retrieval, setting and storing of 8 light scenes

− One push-button operation for switching, buttons, blinds and dimming

− Extension unit for light scene push-button

− For heating and/or cooling mode with/without auxiliary step

− Controller operating modes: comfort, standby, night and frost/heat protection mode

− LED display with symbol display

− With 2 additional sensor surfaces for display control

− Display of operating mode, controller lockout, room and outside temperature as well as time in connection with a

clock

− Integrated temperature sensor

− Temperature measurement via internal and/or external temperature sensor with mean value formation

− Additional connection for external temperature sensor

− Usable as thermostat extension unit

− Temperature control via local measurement or measured value via object

− Blocking function for sensor surface e.g. for cleaning the glass surface

− Value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

− Separate auxiliary power supply needed

− Operation with non-choked output of KNX voltage supply possible (pay attention to current consumption)

− Bus connection via connecting terminal

− For vertical mounting

− For mounting, always use the flat 2gang wall box, order no. 1871

− With adapter ring for dismantling protection and shadow gap formation

− With disassembly suction tool

− For individually labelled glass and touch sensors (configured variations), the Web Configurator generates a layout

number, which must be additionally specified when placing the order.

− Many options for labelling (text and/or icons) are available via the web configurator at

http://ts-glas-sensor.berker.de

ts sensor comfort

technical data

Power supply 18 to 30 V =

Current input 12.5 mA

Connection Bus connection terminal

LED, programmable:

– Status LEDs white

Operation LED blue

Ambient conditions:

– Operating temperature -5 to + 45 °C

Protection class IP 20 (protected against moisture from cleaning)

Dimensions of the glass plate (W x H x D) 86 x 160 x 4 mm

Overall height:

– wall-mounted 5.7 mm

– with adapter ring 10.7 mm

Surface adjustment max. 20 mm

Phasing of the glass plate 0.5 mm; 45°

scoPe of delivery

Glass sensor Comfort

Adapter ring

Removal tool with suction cups

ts sensor with thermostat

technical data

Power supply 18 to 30 V =

Current input max. 23 mA

Connection Bus connection terminal

LED, programmable:

– Status LEDs white

Operation LED blue

Ambient conditions:

– Operating temperature -5 to + 45 °C

– Storage/transport temperature -25 to + 70 °C

Protection class IP 20 (protected against moisture from cleaning)

Dimensions of the glass plate (W x H x D) 86 x 160 x 4 mm

Overall height:

– wall-mounted 5.7 mm

– with adapter ring 10.7 mm

Surface adjustment max. 20 mm

Phasing of the glass plate 0.5 mm; 45°

scoPe of delivery

Glass sensor with thermostat

Adapter ring

Removal tool with suction cups