Kianik Smart Building

کلید هوشمند برکر berker,biq 1

کلید هوشمند برکر berker

berker,biq
کلید 5گنگ(10 پل) - ترموستاتیک
کلیدهای push-button  در 2 مدل نرمال و ترموستاتیک
1و4و6و8 کلیده نرمال و 6 و 8 و 10 کلیده ترموستاتیک
کنترل روشنایی،دیمر، سرمایش و گرمایش، پرده و ...
کنترل روشنایی،دیمر، سرمایش و گرمایش، پرده و ...
در رنگ هـای سفید شیشه ای - سفید مات - استیل
ساخته شده از جنس استیل، شیشه و پلاستیک
قابلیت تعریف سـناریو ( ورود و خروج، مطالعه، مهمان، TV، استراحت و ...)
مجهز به LED نمایانگر

Berker TS Sensor

Understatement is an art, and the Berker TS Sensor makes it perfect. Up to eight functions are

concealed under a pure surface that is practically flush with the wall, and can be custom-labelled

on request. A single touch is all it takes to control lights, heating or blinds. In this way, the Berker

TS Sensor can offer an exciting variety of possibilities – and, at the same time, still seems as

calm as possible.

• Suitable for installation bus systems and relay circuits

• Having the electronics directly on the rear side of the glass plate creates enormous switching

safety

• Particularly flat construction method permits flush mounting

• Readiness and switching states can be display using LEDs

• Completely smooth surface thanks to screw-free fastening

• Labelling on rear side meaning perfect protection

Glass sensors comfort

− With integral bus coupling unit

− Operation by gently touching the sensor surfaces on the white LEDs

− For switch, push-button, dimmer and shutter functions

− Single and two push-button operation parameterisable

− Retrieval, setting and storing of 8 light scenes

− One push-button operation for switching, buttons, blinds and dimming

− Extension unit for light scene push-button

− Integrated temperature sensor

− Temperature measurement via internal and/or external temperature sensor with mean value formation

− Additional connection for external temperature sensor

− Usable as thermostat extension unit

− Provision of the internal temperature value via communication object

− Blocking function for sensor surface e.g. for cleaning the glass surface

− Value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

− Bus connection via connecting terminal

− For vertical mounting

− For mounting, always use the flat 2gang wall box, order no. 1871

− With adapter ring for dismantling protection, shadow jointing and special installation conditions

− With disassembly suction tool

− For individually labelled glass and touch sensors (configured variations), the Web Configurator generates a layout

number, which must be additionally specified when placing the order.

− Many options for labelling (text and/or icons) are available via the web configurator at

http://ts-glas-sensor.berker.de

Glass sensors with thermostat

− With integral bus coupling unit

− Operation by gently touching the sensor surfaces on the white LEDs

− For switch, push-button, dimmer, blind and thermostat functions

− Single and two push-button operation parameterisable

− Retrieval, setting and storing of 8 light scenes

− One push-button operation for switching, buttons, blinds and dimming

− Extension unit for light scene push-button

− For heating and/or cooling mode with/without auxiliary step

− Controller operating modes: comfort, standby, night and frost/heat protection mode

− LED display with symbol display

− With 2 additional sensor surfaces for display control

− Display of operating mode, controller lockout, room and outside temperature as well as time in connection with a

clock

− Integrated temperature sensor

− Temperature measurement via internal and/or external temperature sensor with mean value formation

− Additional connection for external temperature sensor

− Usable as thermostat extension unit

− Temperature control via local measurement or measured value via object

− Blocking function for sensor surface e.g. for cleaning the glass surface

− Value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

− Separate auxiliary power supply needed

− Operation with non-choked output of KNX voltage supply possible (pay attention to current consumption)

− Bus connection via connecting terminal

− For vertical mounting

− For mounting, always use the flat 2gang wall box, order no. 1871

− With adapter ring for dismantling protection and shadow gap formation

− With disassembly suction tool

− For individually labelled glass and touch sensors (configured variations), the Web Configurator generates a layout

number, which must be additionally specified when placing the order.

− Many options for labelling (text and/or icons) are available via the web configurator at

http://ts-glas-sensor.berker.de

 

ts sensor comfort

technical data

Power supply 18 to 30 V =

Current input 12.5 mA

Connection Bus connection terminal

LED, programmable:

- Status LEDs white

 Operation LED blue

Ambient conditions:

- Operating temperature -5 to + 45 °C

Protection class IP 20 (protected against moisture from cleaning)

Dimensions of the glass plate (W x H x D) 86 x 160 x 4 mm

Overall height:

- wall-mounted 5.7 mm

- with adapter ring 10.7 mm

Surface adjustment  max. 20 mm

Phasing of the glass plate  0.5 mm; 45°

-

scoPe of delivery

Glass sensor Comfort

Adapter ring

Removal tool with suction cups

 

ts sensor with thermostat

technical data

Power supply 18 to 30 V =

Current input max. 23 mA

Connection Bus connection terminal

LED, programmable:

- Status LEDs white

 Operation LED blue

Ambient conditions:

- Operating temperature -5 to + 45 °C

- Storage/transport temperature -25 to + 70 °C

Protection class IP 20 (protected against moisture from cleaning)

Dimensions of the glass plate (W x H x D) 86 x 160 x 4 mm

Overall height:

- wall-mounted 5.7 mm

- with adapter ring 10.7 mm

Surface adjustment  max. 20 mm

Phasing of the glass plate  0.5 mm; 45°

-

scoPe of delivery

Glass sensor with thermostat

Adapter ring

Removal tool with suction cups

 

© Copyright 2017 - Kianikco by Mayonez