Kianik Smart Building

کلید هوشمند اشنایدر,سیستم دیزاین schneider,system design 3


کلید هوشمند اشنایدر آلمان - سیستم دیزاین-آنتیک

مدل کلاسیک

کادر کرم+ رویه کرم

کنترل روشنایی، دیمر، سرمایش، گرمایش، پرده و ......
در 3 مدل نرمال و ترموستاتیک و IR
قابلیت تعریف سناریو
هماهنگ با کلیدهای سنتی اشنایدر


انواع رویه کلید سیستم دیزاین:
سفید از جنس Plastic Brilliant | کرم از جنس Plastic Brilliant
 آلومینیومی از جنس Plastic | استیل از جنس Stain Steel Brilliant

انواع کادر کلید سیستم دیزاین:
دیزاین آنتیک و دیزاین آرتک : در طیف وسیع رنگ

در انواع:
2پل ساده| 4 پل ساده و ترموستاتیک| 6 پل ساده | 8 پل ساده و IR و ترموستاتیک

Push-buttons SYSTEM DESIGN

Artec /Antique

Push-button, 1-gang plus/2-gang plus/3-gang plus/4-gang plus

For Artec, Antique.

With integrated bus coupling unit.

Push-button with two operating buttons, operating display, two blue status displays

which can be triggered separately, and a labelling fi eld. The blue operating display can also be used as an orientation sign.

Thelower labelling fi eld can be parameterised as an additional operating key.

The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons.

The device is connected to the bus line with a bus connecting terminal.

KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger 1-,2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2- byte telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval, scene saving, disable functions.

Accessories: Labelling sheets for push-button

plus art. no. MTN617819.

Contents: With protective hood for plaster.

With bus connecting termina

 

Push-button, 4-gang plus with IR receiver 

For Artec, Antique.

With integrated bus coupling unit.

Push-button with eight operating buttons, operating display, eight blue status displays which

can be triggered separately, and a labelling fi eld. The blue operating display can also be used

as an orientation sign. The lower labelling fi eld can be parameterised as an additional operating

key.

The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single

push-buttons.

The functions of each of the keys can be triggered using an IR remote control. The push-button

is pre-programmed for operation with a Merten IR remote control Distance. Many other IR

remote controls (e.g. existing TV or CD player remote controls) can be taught to the push-buttons.

The device is connected to the bus line with a bus connecting terminal.

KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/

dual-surface), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and

long operation), pulse edges with 2-byte telegrams (distinction between short and long operation),

8-bit linear regulator, scene retrieval, scene saving, disable functions.

Accessories: Labelling sheets for push-button plus art. no. MTN617819.

Transmitter: IR remote control Distance, art. no. MTN570222.

Contents: With protective hood for plaster.

With bus connecting terminal. 

 

Multi-function push-button, 2-gang with room temperature control unit 

For Artec, Antique.

Convenient control unit with four operating buttons, operating display, four blue status displays

which can be triggered separately, and a labelling fi eld. The blue operating display can also be

used as an orientation sign.

With room temperature control unit and display.

The room temperature control unit can be used for heating and cooling with infi nitely adjustable

KNX valve drives or to trigger switch actuators and heating actuators. With the white

backlit display for showing e.g. the time, date, temperature and operating mode. Menu for

setting default operating modes, setpoint value, working/non-working day, display mode, time,

switching times and brightness.

The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single

push-buttons.

KNX software functions:

Functions of the multi-function push-button:

Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger 1-,

2- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte

telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval,

scene saving, disable functions, timed control with synchronisation, alarm functions, .the cyclic

reading of external temperature values, fan control.

Functions of the room temperature control unit:

Type of controller: 2-step control, continuous PI control, switching PI control (PWM)

Output: Continuous in the range 0..100% or switching ON/OFF

Controller mode:

Heating with one controller output

Cooling with one controller output

Heating and cooling with separate controller outputs

Heating and cooling with one controller output

2-step heating with 2 control outputs

2-step cooling with 2 control outputs

Operating modes: comfort, comfort extension, standby, night economy, frost/heat protection

Operation: Menu

Accessories: Labelling software, art. no. MTN615022.

Protective hood for plaster, Artec, Trancent, Antique, art. no. MTN628091...

Note: Use to label conventional foils (max. thickness 0.1 mm).

For each device only one fl at size 60 mounting box and one fl ush-mounted module are

required.

Contents: Screw for protection against dismantling.

With protective hood for plaster.

 

Multi-function push-button, 4-gang with room temperature control unit

For Artec.

Convenient control unit with eight operating buttons, operating display, eight blue status displays

which can be triggered separately, and a labelling fi eld. The blue operating display can

also be used as an orientation sign.

With room temperature control unit and display.

With integrated piezoelectric buzzer to display alarm states and IR receiver. All functions of the

respective buttons can be controlled via IR remote control Distance.

The room temperature control unit can be used for heating and cooling with infi nitely adjustable

KNX valve drives or to trigger switch actuators and heating actuators. With the white

backlit display for showing e.g. the time, date, temperature and operating mode. Menu for

setting default operating modes, setpoint value, working/non-working day, display mode, time,

switching times and brightness.

The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single

push-buttons.

KNX software functions:

Functions of the multi-function push-button:

Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger 1-,

2- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte

telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval,

scene saving, disable functions, timed control with synchronisation, alarm functions, .the cyclic

reading of external temperature values, fan control.

Functions of the room temperature control unit:

Type of controller: 2-step control, continuous PI control, switching PI control (PWM)

Output: Continuous in the range 0..100% or switching ON/OFF

Controller mode:

Heating with one controller output

Cooling with one controller output

Heating and cooling with separate controller outputs

Heating and cooling with one controller output

2-step heating with 2 control outputs

2-step cooling with 2 control outputs

Operating modes: comfort, comfort extension, standby, night economy, frost/heat protection

Operation: Menu

Accessories: Labelling software, art. no. MTN615022.

Transmitter: IR remote control Distance, art. no. MTN570222.

Note: Use to label conventional foils (max. thickness 0.1 mm).

For each device only one fl at size 60 mounting box and one fl ush-mounted module are

required.

Contents: With screw for tamper-proofi ng, adhesive label, barrier covering the IR receiver.

With protective hood for plaster.

 

© Copyright 2017 - Kianikco by Mayonez